A Technical Reference Manual
for the
dataTaker 50,500,600 Series3
Data Loggers

Warranty

DataTaker warrants the instruments it manufactures against defects in materials or workmanship for a period of 3 year from the date of delivery to the original customer. This warranty is limited to the replacement or repair of such defects, without charge, when the instrument is returned to dataTaker, or to one of its authorized distributors.

This warranty excludes all other warranties, either expressed or implied, and is limited to a value not exceeding the purchase price of the instrument. Where dataTaker supplies equipment or items manufactured by a third party, then the warranty provided by the third party manufacturer remains.

DataTaker shall not be liable for any incidental or consequential damages resulting from use of the instrument, or for damage to the instrument resulting from accident, abuse, improper implementation, lack of reasonable care, or loss of parts.

Warning

DataTaker products are not authorized for use as critical components in a life support system where failure of the product is likely to effect its safety or effectiveness.

Trademarks

dataTaker is a trademark of dataTaker
Windows is a trademark of Microsoft Corp
PC Card and PCMCIA are trademarks of the Personal Computer Memory Card Industry Association

Firmware Versions

This Technical Reference Manual applies to Series 3 dataTaker 50, 500, 505, 515, 600, 605 and 615 model data loggers, which have firmware version 7.xx installed.

The earlier Series 1 and Series 2 of the dataTaker data loggers are very similar to the Series 3 models, provided these loggers have the latest version firmware installed:

   Series 1  Firmware Version 4.02
   Series 2  Firmware Version 5.00

This manual can be used in support of earlier version data loggers, and differences can be ascertained by comparison with your original Getting Started and Concise Manuals.

Related Documents

Getting Started with DT50, DT500 and DT600 Series dataTakers
Userís Manual DT50, DT500 and DT600 Series dataTakers Series 3
Advanced Communications Manual

Related Products

PMD-01 Panel Mount Display	DeTransfer and DePlot
MC-512, MC-1024, MC-2048 and    MC-4096 SRAM Memory Cards	DeLogger 4    DeLogger Pro 4
MCI-04 Memory Card Reader	Visual Basic Terminal Suite
SS-500 Sensor Simulation Panel	SMSX Modem
PE-500, SIE-500 and LIE-500 enclosures	905U-D Radio Modem

Document Details

Document Number: UM-0078-A0-X0
Published:             September 2003

Regulatory Compliances

The Series 3 dataTaker 50, 500, 505, 515, 600, 605 and 615 model data loggers meet the following standards:

 

EUROPE	This product complies with the requirements of European Directives 89/336/EEC and 73/23/EEC, and conforms with EN55022 Class A (emissions) and EN50082-1 (susceptibility). Mains adaptors use to power this product must comply with EN60950, EN60742 or EN61010.
AUSTRALIA and NEW ZEALAND	This product complies with the requirements of the Australian and New Zealand standard for EMC emissions AS/NZS 3548:1992 Class A. ACN 006 134 863
USA	This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CANADA	This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Depertment of Communications. Le présent appareil numérique níémet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la Classe A prescrites dan les réglements sur le brouillage radioélectrique édictés par le Ministére des Communications du Canada.
CAUTION ñ USE APPROVED ANTISTATIC PROCEDURES	The input and general circuitry of this device is extremely sensitive, and therefore susceptible to damage by static electricity. Always follow approved anti-static procedures when working with this device.
	dataTaker is certified to ISO9002

 

Biolab (Aust) Pty Ltd trading as Datataker
5 Caribbean Drive,
Scoresby, VIC 3179

Tel:  (03) 9757 4477
     +61 3 9757 4477

Fax:  (03) 9753 3483
      +61 3 9753 3483

Web:       www.datataker.com
Email:       support@datataker.com.au